How to adjust the clamping force of automatic vertical rubber injection molding machine

Apr 17, 2020

automatic vertical rubber injection molding machine is a common equipment of injection molding machine, which is generally widely used in plastic products industry. When using a automatic vertical rubber injection molding machinee, the problem of adjusting the clamping force is generally encountered during hitting. This benefit is related to whether the machine can be normally produced and whether the produced product meets the requirements. More importantly, the correct adjustment of the clamping force of the machine To extend the service life of machinery, how to adjust the clamping force of vertical injection molding machine?

1. First, close the switch of the mold adjustment device of the automatic vertical rubber injection molding machine, and then adjust the thickness of the container until both sides of the mold start to be fixed, and then turn off the switch of the mold adjustment device.
automatic vertical rubber injection molding machine
2. You can enjoy manual operation to open the mold. When the mold is opened, you can generally start the mold adjustment device to reduce the mold clamping force. Then disconnect the mold adjustment device, slow mold clamping operation, mold thickness The degree of reduction is proportional to the clamping force generated, so it is generally necessary to reduce the mold thickness in a gradual manner.

3. When adjusting the clamping force of the vertical injection molding machine, it is best not to use the express clamping.

4. In the vertical injection molding machine, when the low-pressure mold clamping stops the stroke switch, it is released. The moment the stroke switch is pressed, the pressure gauge will indicate the working pressure value of the clamping cylinder during the clamping action, and the display time is very short, which is also the reason why the express clamping cannot be used.