What are the characteristics of vertical rubber injection molding machine?

Feb 14, 2022

Vertical rubber injection molding machine is a mechanical equipment, usually composed of injection system, mold clamping system, hydraulic transmission system, electrical control system, lubrication system, heating and cooling system, safety monitoring system, etc. The injection system is one of the most important components of the vertical injection molding machine. Generally, there are plunger type, screw type, screw pre-plastic plunger injection type and other main forms. The screw type is the most widely used at present. Its function is that in a cycle of the injection molding machine, after a certain amount of plastic can be heated and plasticized within a specified time, under a certain pressure and speed, the screw will melt the plastic. Plastic is injected into the mold cavity.
So as a commonly used injection molding equipment, what are the characteristics of the vertical injection molding machine?
1. The injection device and the clamping device are on the same vertical centerline, and the mold is opened and closed in the up and down direction. The floor area is only about half of that of the horizontal machine, so the productivity is about twice as much in terms of floor space.
Vertical injection molding machine is a mechanical device. Usually consists of injection system, clamping system, hydraulic transmission system, electrical control system, lubrication system, heating and cooling system, safety monitoring system, etc. The injection system is one of the most important components of the vertical injection molding machine. Generally, there are plunger type, screw type, screw pre-plastic plunger injection type and other main forms. The most widely used is the screw type. Its function is that in a cycle of the injection molding machine, after a certain amount of plastic can be heated and plasticized within a specified time, the molten plastic can be injected into the mold cavity through a screw under a certain pressure and speed.
2. It is easy to realize insert molding. Because the mold surface faces up, insert placement is easy. If the lower platen is fixed and the upper platen is movable, the combination of the belt conveyor and the manipulator can easily realize fully automatic insert molding.
3. The weight of the mold is supported by the horizontal template to open and close up and down, and the phenomenon that the template cannot be opened and closed will not occur similar to the horizontal machine due to the gravity of the mold. It is beneficial to maintain the accuracy of machinery and molds for durability.
4. The cavity of each plastic part can be taken out by a simple manipulator, which is conducive to precision molding.
5. Generally, the clamping device is open around, and it is easy to configure various automation devices, which is suitable for automatic molding of complex and delicate products.
6. The belt conveying device is easy to install through the middle of the mold, which is convenient for automatic molding production.
7. It is easy to ensure the consistency of the resin fluidity in the mold and the mold temperature distribution.
8. Equipped with rotating table, moving table and inclined table, etc., it is easy to realize insert molding and in-mold combined molding.
9. During small batch trial production, the mold structure is simple and low cost, and it is easy to unload.
10. Having withstood the test of many earthquakes, the vertical machine has better seismic resistance than the horizontal machine due to its low center of gravity.


Thank you for your attention on Qiaolian machine

Please fill the form to let us know your need. Our sales will get in touch with you ASAP.

Contact Us