What are the factors that cause irregularities in the operation of the vertical rubber injection molding machine?

Jul 25, 2020

Vertical rubber injection molding machine is a processing method of injection cooling molding. It is to melt plastic raw materials for injection molding. There will be many problems during the operation of the vertical rubber injection molding machine, such as why the injection molding is not formed! There are many influencing factors. What is the root cause?

Vertical rubber injection molding machines have a very complicated internal structure. Therefore, when the injection speed of the vertical rubber injection molding machine is slow, it will be easy to cause irregularities when it encounters a plastic with a large viscosity. Therefore, when the injection pressure of the vertical rubber injection molding machine is too low, the injection time will be short. phenomenon.

The main point of operation of the vertical rubber injection molding machine is the setting of parameters first, and then the requirements for raw materials. Under the intact parameters of the injection molding machine, if the vertical rubber injection molding machine has no other failures, the injection molding process can be successfully completed. However, there are also great requirements for the use of materials. When the vertical rubber injection molding machine is improperly adjusted, it is short or excessive. It causes the feeding control system to operate abnormally, and also causes the vertical rubber injection molding machine to not form. Also, if the material temperature is too low, the injection molding will not be formed. The above factors are the main reasons for the injection molding of vertical rubber injection molding machine.